Instructions:

1. Mounting:

   • Ensure the diode is mounted with adequate heat dissipation if operating near maximum power dissipation.
   • Avoid mechanical stress on the leads.

2. Handling:

   • Handle with care to avoid damage to the leads or body.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

3. Soldering:

   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Allow the device to cool naturally after soldering.

4. Testing:

   • Test the zener voltage at the specified test current (Izt) to ensure it meets the required tolerance.
   • Measure reverse current (Ir) at the rated voltage to ensure it is within specifications.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Follow recommended storage conditions to prevent degradation.

6. Operating Conditions:

   • Ensure the operating temperature does not exceed the specified limits.
   • Do not exceed the maximum zener current to prevent damage to the diode.

7. Circuit Design:

   • Use appropriate series resistors to limit current through the diode.
   • Consider the zener capacitance in high-frequency applications.