Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the positive terminal of the power supply.
   • Connect the ground (GND) pin to the negative terminal of the power supply.

2. Output Configuration:

   • The output voltage (V_OUT) is selectable by connecting the appropriate resistors or using the built-in voltage options provided by the device.
   • Refer to the datasheet for specific resistor values or configuration settings.

3. Load Connection:

   • Connect the load between the output (V_OUT) and ground (GND) pins.

4. Capacitor Requirements:

   • Place a 1μF ceramic capacitor close to the input (V_IN) and ground (GND) pins to ensure stability.
   • Place a 1μF ceramic capacitor close to the output (V_OUT) and ground (GND) pins to filter the output and maintain stability.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high current levels or in high ambient temperatures.
   • Consider using a heatsink if necessary.

6. Shutdown Mode:

   • To enter shutdown mode, pull the SHDN pin low.
   • The quiescent current will drop to approximately 1.0 μA in this mode.

7. Storage and Handling:

   • Store the device in a dry, cool environment within the specified storage temperature range.
   • Handle with care to avoid damage from electrostatic discharge (ESD).

8. Testing and Verification:

   • After assembly, verify the output voltage and current using a multimeter.
   • Check for proper operation under various load conditions and input voltages.

For more detailed information, refer to the official CAT5113VI datasheet.