Instructions:

1. Handling:

   • Handle with care to avoid damage to the component.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C before soldering.
   • Use a soldering iron with a temperature setting of 320°C to 350°C.
   • Apply solder to the pads and not directly to the component.
   • Ensure the solder joint is smooth and free of voids.

3. Mounting:

   • Place the resistor on the PCB according to the silkscreen markings.
   • Ensure the component is aligned correctly and securely before soldering.
   • Avoid excessive force when placing the component to prevent damage.

4. Testing:

   • After soldering, visually inspect the solder joints for quality.
   • Use a multimeter to verify the resistance value matches the specified tolerance.
   • Check for any shorts or open circuits.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from moisture and static.

6. Disposal:

   • Dispose of the component in accordance with local environmental regulations.
   • Recycle where possible.