Share:
Specifications
SKU: 4477593
| Parameter | Value |
|---|---|
| Type | Relay Module |
| Model | G2RL-1-E-12VDC |
| Supply Voltage | 12V DC |
| Coil Power | 0.36W |
| Coil Resistance | 330Ω |
| Contact Form | SPDT (Single Pole Double Throw) |
| Contact Rating | 5A at 250V AC |
| **Insulation Resistance | 100MΩ or more (500V DC) |
| Dielectric Strength | 2500V AC for 1 minute |
| **Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% RH (non-condensing) |
| Vibration | 10 to 55Hz, 2G |
| Shock | 50G (half-sine wave) |
| Weight | 15g |
Instructions:
- Power Supply: Connect the relay module to a 12V DC power source.
- Control Signal: Apply a control signal to the coil terminals to activate the relay. The relay will switch when the coil is energized.
- Load Connection: Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
- Mounting: Mount the relay in a well-ventilated area to ensure proper heat dissipation.
- Handling: Avoid exposing the relay to excessive vibration or shock.
- Testing: Before installing in a final application, test the relay to ensure it operates correctly under the intended conditions.
- Safety: Ensure that the relay is installed and used in accordance with local electrical codes and standards.
Inquiry - G2RL-1-E-12VDC
