Instructions for Use

1. Circuit Design:

   • Ensure the operating voltage of your circuit falls within the 1.8V to 5.5V range.
   • Place the ICP-S1.0 as close as possible to the protected circuit to minimize parasitic inductance.

2. Soldering:

   • Use a soldering iron with a temperature setting between 300°C and 350°C.
   • Apply a small amount of flux to the pads before soldering.
   • Solder the device quickly to avoid thermal stress.

3. Testing:

   • After soldering, visually inspect the device for any solder bridges or lifted pads.
   • Use a multimeter to check for continuity and ensure there are no short circuits.

4. Handling:

   • Handle the device with care to avoid static discharge.
   • Store the device in a dry, cool place away from direct sunlight.

5. Application Notes:

   • The ICP-S1.0 is designed to protect sensitive circuits from transient overvoltages and overcurrents.
   • For optimal performance, use it in conjunction with other protection devices like fuses and TVS diodes.

6. Troubleshooting:

   • If the device fails to protect the circuit, check the connections and ensure the operating conditions are within the specified limits.
   • Replace the device if it has been exposed to excessive voltage or current.