Instructions for Use

1. Power Supply:

   • Ensure that both VDD1 and VDD2 are powered within the specified range (3.0 V to 5.5 V).
   • Connect GND1 and GND2 to their respective ground references.

2. Signal Connections:

   • Connect the input signals to the IN1 and IN2 pins.
   • Connect the output signals to the OUT1 and OUT2 pins.

3. Isolation Considerations:

   • Maintain proper isolation between the primary and secondary sides to ensure safety and performance.
   • Use appropriate PCB layout techniques to minimize noise and crosstalk.

4. Operating Temperature:

   • Operate the device within the specified temperature range (-40°C to +125°C) to avoid damage or performance degradation.

5. Data Rate:

   • The device supports data rates up to 150 Mbps. Ensure that the system design does not exceed this limit.

6. Propagation Delay:

   • Account for the propagation delay of 25 ns (max) in your timing calculations to ensure proper signal integrity.

7. Power Consumption:

   • The power consumption is 1.2 mW per channel at 1 Mbps. Design the power supply to handle the total power consumption based on the number of channels used.

8. Handling and Storage:

   • Store the device in a dry, static-free environment.
   • Handle the device with ESD protection to prevent damage.

9. Compliance:

   • The device is RoHS compliant, ensuring it meets environmental standards.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.