Share:
Specifications
SKU: 4604756
| Parameter | Description |
|---|---|
| Model | KR3600-PRO |
| Type | High-Precision Digital Multimeter |
| Display | 4.5-Digit LCD with Backlight |
| Input Impedance | 10 MΩ |
| Voltage Measurement | DC: 0.01 mV to 1000 V, AC: 0.01 mV to 750 V (True RMS) |
| Current Measurement | DC: 0.01 μA to 10 A, AC: 0.01 μA to 10 A (True RMS) |
| Resistance Measurement | 0.01 Ω to 40 MΩ |
| Capacitance Measurement | 0.01 nF to 100 mF |
| Frequency Measurement | 0.1 Hz to 1 MHz |
| Duty Cycle Measurement | 0.1% to 99.9% |
| Temperature Measurement | -50°C to 1200°C (with K-type thermocouple) |
| Diode Test | Forward Voltage Measurement |
| Continuity Test | Beep when resistance is below 50 Ω |
| Battery | 9V Battery (included) |
| Power Consumption | < 10 mA |
| Dimensions | 185 mm x 85 mm x 35 mm |
| Weight | 250 g (without battery) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% RH (non-condensing) |
| Compliance | CE, RoHS |
Instructions
Power On/Off:
- Press the ON/OFF button to turn the multimeter on or off.
Selecting Measurement Function:
- Use the function selector switch to choose the desired measurement type (e.g., Voltage, Current, Resistance).
Range Selection:
- For auto-ranging, set the range selector to "AUTO."
- For manual ranging, select the appropriate range for your measurement.
Connecting Probes:
- Insert the red probe into the appropriate socket (e.g., VΩmA for voltage and resistance, 10A for high current).
- Insert the black probe into the COM socket.
Taking Measurements:
- Connect the probes to the circuit or component you want to measure.
- Read the value displayed on the LCD screen.
Special Functions:
- Diode Test: Set the function selector to "DIODE" and connect the probes to the diode leads.
- Continuity Test: Set the function selector to "CONT" and connect the probes to the points you want to test for continuity.
- Temperature Measurement: Connect a K-type thermocouple to the temperature input and place the probe in the area to be measured.
Battery Replacement:
- Turn off the multimeter.
- Remove the battery cover at the back.
- Replace the 9V battery.
- Reattach the battery cover.
Care and Maintenance:
- Keep the multimeter clean and dry.
- Store in a cool, dry place.
- Do not expose to extreme temperatures or humidity.
- Avoid dropping or subjecting the multimeter to physical shock.
Safety Precautions:
- Always disconnect the power source before making measurements.
- Use the appropriate probes and leads for the measurement.
- Do not exceed the maximum ratings specified in the parameter table.
- Wear appropriate personal protective equipment (PPE) when necessary.
Inquiry - KR3600-PRO
