Share:
Specifications
SKU: 4704451
| Parameter | Description | Units |
|---|---|---|
| Resistance Range | Range of resistance values available | Ω |
| Tolerance | Precision of resistance value | % |
| Power Rating | Maximum power the resistor can dissipate without damage | W |
| Temperature Coefficient | Change in resistance per degree change in temperature | ppm/°C |
| Operating Temperature | Range of temperatures over which the resistor can operate safely | °C |
| Insulation Resistance | Minimum resistance between the resistor body and any exposed metal parts | MΩ |
| Surge Withstanding | Ability to withstand short-term overvoltage | V |
| Soldering Temperature | Maximum temperature for soldering, typically for a specified duration | °C (s) |
| Storage Temperature | Range of temperatures over which the resistor can be stored without damage | °C |
| Humidity Resistance | Ability to resist changes in resistance due to humidity | % RH |
Instructions for Using MEGAMOS-RES
Selecting the Right Resistor:
- Choose the resistance value, tolerance, and power rating based on your circuit requirements.
- Ensure the temperature coefficient and operating temperature range are suitable for your application.
Handling and Storage:
- Store the resistors in a dry environment within the specified storage temperature range.
- Avoid exposing the resistors to excessive humidity to prevent degradation.
Installation:
- Use the specified soldering temperature and duration to avoid damaging the resistor.
- Ensure proper orientation if the resistor has polarity (though most resistors are non-polarized).
Testing:
- Measure the resistance using a multimeter to ensure it falls within the specified tolerance.
- Test the resistor under operating conditions to ensure it meets the required performance specifications.
Surge Protection:
- If the resistor will be exposed to surges, ensure it is rated for the expected surge voltage and duration.
Insulation Check:
- Verify the insulation resistance to ensure there is no leakage current between the resistor body and any exposed metal parts.
Environmental Considerations:
- Regularly inspect the resistor for signs of wear or damage, especially if used in harsh environments.
By following these guidelines, you can ensure optimal performance and longevity of the MEGAMOS-RES resistors in your applications.
(For reference only)Inquiry - MEGAMOS-RES
