Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • The device should be powered down properly to avoid data corruption.

2. Current Consumption:

   • Monitor the standby current (Icc) which should not exceed 1.0 μA at 3.0V.
   • During active operations (read/write), the current consumption can reach up to 6.0 mA.

3. Temperature Ranges:

   • For commercial applications, operate the device between -40°C and 85°C.
   • For industrial applications, the operating temperature range is -40°C to 105°C.
   • Store the device between -65°C and 150°C.

4. Timing Parameters:

   • Respect the write cycle time (tWC) of 5 ms to ensure reliable data programming.
   • Page program time (tPP) is 2.5 ms.
   • Sector erase time (tSE) is 200 ms.
   • Block erase time (tBE) is 300 ms.
   • Chip erase time (tCE) is 3000 ms.

5. Signal Levels:

   • Ensure that the data output high level (VOH) is at least 2.4V when Vcc is 3.0V.
   • The data output low level (VOL) should not exceed 0.4V.
   • Input signals should have a high voltage (VIH) of at least 2.0V and a low voltage (VIL) not exceeding 0.8V.

6. Programming and Erasing:

   • Follow the specific command sequences for programming and erasing as detailed in the device datasheet.
   • Verify the status register after each operation to ensure successful completion.

7. Data Retention:

   • The device is designed to retain data for at least 10 years under normal operating conditions.

8. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage the component.
   • Store the device in a dry, cool environment to prevent moisture-related issues.

For more detailed information, refer to the full datasheet provided by the manufacturer.