Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 2.0V to 5.5V.
   • Connect a decoupling capacitor (typically 0.1μF) between V_CC and ground as close to the IC as possible to stabilize the power supply.

2. Input Signals:

   • The common mode input range (V_CM) should be between 0V and 3.5V when V_CC is 5V.
   • The differential input voltage (V_ID) should not exceed the limits of -0.3V to 5.8V to avoid damage to the IC.

3. Output Configuration:

   • The output voltage swing (V_OH and V_OL) is dependent on the load current (I_L). Ensure the load current is within the specified limits to achieve the desired output voltage levels.
   • For optimal performance, use a load resistor that matches the output impedance of the amplifier.

4. Temperature Considerations:

   • The NJM2112V(TE1) is designed to operate within a temperature range of -40°C to +85°C. Ensure the ambient temperature does not exceed these limits to prevent thermal stress.

5. Handling Precautions:

   • The IC is sensitive to electrostatic discharge (ESD). Handle the device with care and use proper ESD protection measures.
   • Avoid applying excessive voltage or current to any pin, as this can cause permanent damage to the IC.

6. Mounting and Layout:

   • Follow recommended PCB layout guidelines to ensure proper heat dissipation and minimize noise interference.
   • Keep signal paths short and direct to reduce parasitic effects and improve performance.

By following these instructions, you can ensure reliable and efficient operation of the NJM2112V(TE1) operational amplifier.