Share:
Specifications
SKU: 4957423
16A Miniature Power PC Board Relay
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | OZ-SS-124L |
| Type | Component type | Surface Mount Switch |
| Function | Switch function | SPST (Single Pole Single Throw) |
| Contact Form | Contact configuration | Normally Open (NO) |
| Actuator Style | Actuator type | Push Button |
| Operating Force | Force required to actuate the switch | 1.5N ± 0.5N |
| Travel Distance | Distance the actuator moves when pressed | 0.8mm ± 0.2mm |
| Contact Resistance | Maximum resistance between contacts | 50mΩ max |
| Insulation Resistance | Minimum resistance between non-contacting points | 100MΩ min |
| Dielectric Strength | Voltage the switch can withstand without breakdown | 500V AC for 1 minute |
| Operating Temperature | Temperature range for reliable operation | -40°C to +85°C |
| Storage Temperature | Temperature range for storage | -40°C to +125°C |
| Humidity Range | Relative humidity range for operation | 5% to 95% (non-condensing) |
| Termination | Method of connecting to the circuit | Soldering |
| Dimensions | Overall dimensions of the component | 6.0mm x 6.0mm x 3.0mm |
| Weight | Weight of the component | 0.1g |
| RoHS Compliance | Compliance with RoHS standards | Yes |
| Lead-Free | Lead-free solder compatibility | Yes |
Instructions for Use
Handling and Storage:
- Store the switch in a dry, cool place away from direct sunlight.
- Handle the switch with care to avoid damaging the actuator or terminals.
Mounting:
- Place the switch on the PCB according to the footprint provided in the datasheet.
- Ensure that the switch is aligned correctly before soldering.
- Use a temperature-controlled soldering iron and follow standard reflow soldering profiles.
Soldering:
- Preheat the PCB to reduce thermal shock.
- Apply a small amount of solder to each terminal.
- Avoid excessive heat and soldering time to prevent damage to the switch.
Testing:
- After soldering, visually inspect the connections for proper wetting and absence of bridges.
- Test the switch using a multimeter to ensure it operates correctly (open and closed states).
Operation:
- Apply the operating force (1.5N ± 0.5N) to the actuator to close the contacts.
- The switch will return to its normally open state when the force is removed.
Maintenance:
- Clean the switch with a soft, dry cloth if necessary.
- Do not use abrasive materials or solvents that may damage the switch.
Disposal:
- Dispose of the switch in accordance with local regulations and environmental guidelines.
Inquiry - OZ-SS-124L
