Share:
Specifications
SKU: 4968756
OPAMP GP R-R 700KHZ 8SOIC
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | - | 5.5 | V | |
| Quiescent Current | IQ | - | 1.0 | 3.0 | μA | VCC = 5V |
| Input Offset Voltage | VOS | - | 10 | 45 | μV | VCC = 5V, TA = 25°C |
| Input Bias Current | IB | - | 10 | 100 | pA | VCC = 5V, TA = 25°C |
| Input Voltage Range | VI | 0 | - | VCC - 1.5 | V | VCC = 5V |
| Output Voltage Swing | VOUT | 0 | - | VCC - 1.5 | V | VCC = 5V, RL = 2kΩ |
| Slew Rate | SR | - | 0.2 | - | V/μs | VCC = 5V, RL = 2kΩ |
| Common Mode Rejection Ratio | CMRR | 90 | - | 110 | dB | VCC = 5V, f = 60Hz |
| Power Supply Rejection Ratio | PSRR | 90 | - | 110 | dB | VCC = 5V, f = 1kHz |
| Operating Temperature | TOP | -40 | - | 125 | °C |
Instructions for Using OP727ARZ
Supply Voltage:
- Ensure the supply voltage (VCC) is within the range of 2.7V to 5.5V. The typical operating voltage is 5V.
Quiescent Current:
- The quiescent current (IQ) is typically 1.0 μA at 5V and can go up to 3.0 μA. This low current consumption makes the OP727ARZ suitable for battery-powered applications.
Input Offset Voltage:
- The input offset voltage (VOS) is typically 10 μV at 25°C. Ensure that the input signals are balanced to minimize the effect of this offset.
Input Bias Current:
- The input bias current (IB) is typically 10 pA at 25°C. Use high-impedance sources to minimize the impact of this current on your circuit.
Input Voltage Range:
- The input voltage range (VI) should be between 0V and VCC - 1.5V. Avoid exceeding these limits to prevent damage to the op-amp.
Output Voltage Swing:
- The output voltage swing (VOUT) can range from 0V to VCC - 1.5V with a load resistance of 2kΩ. Ensure that the load resistance is appropriate for your application.
Slew Rate:
- The slew rate (SR) is typically 0.2 V/μs. This parameter is important for high-frequency applications to ensure that the output can follow rapid changes in the input signal.
Common Mode Rejection Ratio (CMRR):
- The CMRR is typically 100 dB at 60 Hz. This high ratio helps in rejecting common-mode noise, making the op-amp suitable for precision applications.
Power Supply Rejection Ratio (PSRR):
- The PSRR is typically 100 dB at 1 kHz. This high ratio ensures that variations in the power supply have minimal impact on the output signal.
Operating Temperature:
- The operating temperature range (TOP) is from -40°C to 125°C. Ensure that the ambient temperature is within this range to avoid thermal stress and potential failure.
Handling Precautions:
- Handle the OP727ARZ with care to avoid static discharge, which can damage the device. Use proper ESD protection measures during handling and installation.
Mounting:
- Ensure proper mounting and soldering techniques to avoid mechanical stress on the device. Follow the recommended PCB layout guidelines provided by the manufacturer.
By following these instructions, you can ensure optimal performance and reliability of the OP727ARZ in your circuits.
(For reference only)Inquiry - OP727ARZ
