Share:
Specifications
SKU: 5027995
Zener diode
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | PTZ16B |
| Type | Type of Device | Zener Diode |
| Voltage (Vz) | Zener Voltage at Test Current | 16V |
| Power (Pz) | Maximum Power Dissipation | 500mW |
| Current (Iz) | Test Current for Zener Voltage | 5mA |
| Current (Izm) | Maximum Zener Current | 50mA |
| Capacitance (Cj) | Junction Capacitance at Zero Bias | 4pF |
| Temperature Range | Operating Temperature Range | -65°C to +150°C |
| Mounting Type | Method of Mounting | Through-Hole |
| Package/Case | Physical Package Type | DO-35 |
| Lead Spacing | Distance Between Leads | 2.54mm (0.100") |
| Tolerance | Zener Voltage Tolerance | ±5% |
Instructions:
- Handling: Handle the PTZ16B with care to avoid damage to the leads or body.
- Soldering: Use a temperature-controlled soldering iron set to a maximum of 300°C (572°F) for no more than 5 seconds per joint. Avoid excessive heat as it can damage the diode.
- Storage: Store in a dry, cool place away from direct sunlight and corrosive substances.
- Mounting: Ensure that the leads are securely soldered to the PCB. Use a heatsink if operating near the maximum power dissipation.
- Testing: Test the diode using a multimeter to ensure it is functioning correctly before final assembly.
- Orientation: Pay attention to the polarity when mounting the diode. The cathode (positive) is usually marked with a band on the diode body.
- Operating Conditions: Do not exceed the maximum ratings specified in the table to prevent damage or failure.
Inquiry - PTZ16B
