Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 3.6V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • Apply input signals such that the low-level voltage (V_IL) does not exceed 0.8V and the high-level voltage (V_IH) is at least 2.0V or up to V_CC.

3. Output Signals:

   • The output low voltage (V_OL) will be no more than 0.4V.
   • The output high voltage (V_OH) will be at least 2.4V or up to V_CC - 0.4V.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 3.5 nanoseconds.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 150 milliwatts. Ensure adequate heat dissipation if operating near this limit.

6. Temperature Ranges:

   • The device can operate within an ambient temperature range of -40°C to 85°C.
   • Store the device in an environment with a temperature range of -65°C to 150°C.

7. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage. Use ESD protective equipment when handling.

8. Soldering:

   • Follow recommended soldering profiles to ensure reliable connections and prevent thermal damage to the device.

9. Testing:

   • Perform initial testing under controlled conditions to verify proper operation before integrating into a larger system.