Instructions:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 3.0V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Standby Mode:

   • To enter standby mode, set the appropriate control pin to low.
   • The device will consume approximately 10 μA in this mode.

3. Active Mode:

   • Set the control pin to high to activate the device.
   • The active current consumption is typically 200 mA.

4. Output Power:

   • The maximum output power is 2.8W into a 4Ω load.
   • Ensure the load impedance matches the specified value to avoid damage or inefficiency.

5. SNR (Signal-to-Noise Ratio):

   • The device provides a typical SNR of 96 dB, ensuring high-quality audio reproduction.

6. THD+N (Total Harmonic Distortion + Noise):

   • At 1kHz and 1W into an 8Ω load, the THD+N is typically 0.01%, indicating low distortion.

7. PSRR (Power Supply Rejection Ratio):

   • The device has a PSRR of 60 dB at 100Hz, effectively rejecting power supply noise.

8. EMI (Electromagnetic Interference):

   • The device is designed to minimize EMI, with performance typically better than -60 dBμV/m at 100MHz.

9. Operating Temperature:

   • The device can operate within a temperature range of -40°C to 85°C.
   • Avoid operating in extreme temperatures to prevent damage.

10. Storage Temperature:

    • Store the device in a temperature range of -65°C to 150°C to ensure long-term reliability.

11. Mounting and Handling:

    • Handle the device with care to avoid static discharge.
    • Follow standard PCB mounting procedures to ensure proper soldering and connection.

12. Testing and Validation:

    • After installation, perform functional tests to verify the device is operating correctly.
    • Check for any signs of overheating or abnormal behavior.