Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 6.0V to avoid damage to the device.

2. Input Voltage Levels:

   • For a valid low input, the voltage should be less than or equal to 0.8V.
   • For a valid high input, the voltage should be greater than or equal to 2.0V.

3. Output Voltage Levels:

   • When the output is low, the voltage will be approximately 0.1V with a maximum of 0.4V when sourcing 4 mA.
   • When the output is high, the voltage will be at least 2.4V when sinking -4 mA.

4. Propagation Delay Time (t_pd):

   • The typical propagation delay time is 12 ns at a supply voltage of 5V and an ambient temperature of 25°C.

5. Power Consumption:

   • The power consumption is typically 100 μW at a frequency of 1 MHz and a supply voltage of 5V.

6. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

7. Mounting and Soldering:

   • Follow standard surface mount technology (SMT) procedures for mounting and soldering.
   • Ensure proper alignment and soldering to avoid short circuits and poor connections.

8. Operating Temperature:

   • The device is designed to operate over a wide temperature range, but optimal performance is achieved at room temperature (25°C).

9. Testing:

   • After assembly, test the device under the specified conditions to ensure it meets the required specifications.