Share:
Specifications
SKU: 5248799
150W STEREO / 300W MONO PurePath? HD ANALOG-INPUT POWER STAGE
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.75 | 5.0 | 5.25 | V | Power supply voltage for the device |
| Quiescent Current | IQ | - | 18 | - | mA | Quiescent current at VDD = 5V, no load |
| Output Power (8Ω Load) | POUT | - | 2.8 | - | W | Continuous average output power per channel at THD+N = 1% |
| Efficiency | η | - | 90 | - | % | Efficiency at POUT = 2.8W, VDD = 5V |
| Signal-to-Noise Ratio | SNR | - | 105 | - | dB | A-weighted, reference level = 1W into 8Ω |
| Total Harmonic Distortion | THD+N | - | 0.05 | - | % | At POUT = 1W into 8Ω, VDD = 5V |
| Input Sensitivity | VIN | - | 1.0 | - | Vpp | Input voltage required for full-scale output |
| Input Impedance | ZIN | - | 10 | - | kΩ | Differential input impedance |
| Operating Temperature Range | TOPR | -40 | - | 85 | °C | Ambient temperature range for normal operation |
| Storage Temperature Range | TSTG | -40 | - | 125 | °C | Temperature range for storage |
| ESD Rating | HBM | - | - | 2000 | V | Human Body Model |
| Package Type | - | - | - | QFN-24 | Quad Flat No-Lead package |
Instructions:
Power Supply:
- Ensure the supply voltage (VDD) is within the specified range of 4.75V to 5.25V.
- Use a stable and clean power source to avoid noise and instability.
Input Signal:
- Apply the input signal with a peak-to-peak voltage (VIN) of approximately 1.0V for full-scale output.
- Ensure the input impedance (ZIN) is matched to the source to avoid loading issues.
Output Configuration:
- Connect an 8Ω load for optimal performance.
- Verify that the output power (POUT) does not exceed 2.8W to prevent distortion and potential damage.
Thermal Management:
- Operate the device within the specified operating temperature range (-40°C to 85°C).
- Ensure adequate heat dissipation if operating near the upper temperature limit.
Electrostatic Discharge (ESD) Protection:
- Handle the device with appropriate ESD precautions to avoid damage.
- The device has an ESD rating of up to 2000V (HBM).
Storage:
- Store the device in a controlled environment within the storage temperature range (-40°C to 125°C).
Package Handling:
- The TAS5613APHDR is packaged in a QFN-24 package. Follow standard surface mount technology (SMT) guidelines for soldering and handling.
Inquiry - TAS5613APHDR
