Share:
Specifications
SKU: 5262460
AMP AUD CLASS D BTL PWRSSO36
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Supply Voltage (Vcc) | Operating voltage range | 9 to 26 | V |
| Quiescent Current | Current consumption at no load | 250 | mA |
| Output Power | Maximum output power into 4Ω | 50 | W |
| Frequency Response | Range of frequencies over which the amplifier can operate | 20 to 20,000 | Hz |
| Signal-to-Noise Ratio (SNR) | Ratio of signal power to noise power | 100 | dB |
| Total Harmonic Distortion (THD) | Measure of distortion present in the output signal | 0.03% | - |
| Channel Separation | Isolation between channels | 70 | dB |
| Input Sensitivity | Voltage level required to produce rated output power | 500 | mV |
| Input Impedance | Resistance presented to the input signal | 47 | kΩ |
| Protection Features | Built-in protection mechanisms | Overheating, short-circuit, and overvoltage protection | - |
| Operating Temperature | Range of temperatures for safe operation | -25 to +85 | °C |
| Storage Temperature | Range of temperatures for storage | -40 to +125 | °C |
| Package Type | Physical package of the component | P13TR | - |
Instructions for Using TDA7491P13TR:
Power Supply:
- Ensure the supply voltage is within the specified range (9 to 26V).
- Use a stable power source to avoid voltage fluctuations.
Installation:
- Mount the TDA7491P13TR on a heatsink to dissipate heat effectively.
- Ensure good thermal contact by using thermal paste or a thermal pad.
Connections:
- Connect the input signals to the appropriate input pins.
- Connect the output terminals to the speakers or load.
- Ground all connections properly to avoid interference and ensure safety.
Protection:
- The TDA7491P13TR has built-in protection against overheating, short-circuits, and overvoltage. However, it is advisable to monitor the operating conditions to prevent damage.
Operation:
- Turn on the power supply and check for any unusual sounds or behaviors.
- Adjust the input signal level to achieve the desired output power without exceeding the maximum ratings.
Maintenance:
- Regularly inspect the component and connections for signs of wear or damage.
- Keep the heatsink clean and free from dust to ensure efficient cooling.
Storage:
- Store the TDA7491P13TR in a dry, cool place within the specified storage temperature range (-40 to +125°C).
By following these instructions, you can ensure optimal performance and longevity of the TDA7491P13TR audio amplifier.
(For reference only)Inquiry - TDA7491P13TR
