Instructions for Using TPS23753APW

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply within the specified range (4.5V to 60V).
   • Ensure the ground (GND) is properly connected to the system ground.

2. Output Configuration:

   • The TPS23753APW has multiple output channels. Connect the load to the appropriate output pins.
   • Ensure the total current drawn from each channel does not exceed the maximum continuous output current (3.0A).

3. Protection Features:

   • Overcurrent Protection (OCP): The device will shut down if the current exceeds the typical trip point (3.3A to 3.8A).
   • Undervoltage Lockout (UVLO): The device will not operate if the input voltage falls below 4.0V.
   • Thermal Shutdown (TSD): The device will shut down if the internal temperature exceeds 160°C.

4. Thermal Management:

   • Place the device on a heatsink or a PCB with adequate thermal vias to ensure proper heat dissipation.
   • Avoid operating the device in environments where the temperature exceeds 85°C for extended periods.

5. Storage and Handling:

   • Store the device in a dry environment within the storage temperature range (-65°C to 150°C).
   • Handle the device with care to avoid damage to the pins and the package.

6. Testing and Validation:

   • Before deploying the device in a final application, test it under various conditions to ensure it meets the required performance specifications.
   • Use a multimeter to verify the input and output voltages and currents.

7. Compliance and Standards:

   • Ensure that the design complies with relevant safety and regulatory standards for your specific application.