Share:


TS80L186EB13

Specifications

SKU: 5334878

BUY TS80L186EB13 https://www.utsource.net/itm/p/5334878.html
16-BIT HIGH-INTEGRATION EMBEDDED PROCESSORS
Parameter Description Min Typ Max Unit
Supply Voltage (VDD) Operating voltage range 2.7 - 5.5 V
Operating Temperature Range Temperature range for operation -40 - 85 °C
Storage Temperature Range Temperature range for storage -65 - 150 °C
Maximum Output Current per Port Maximum current that can be sourced or sunk by each I/O port - - 25 mA
Maximum Total Output Current Maximum total current that can be sourced or sunk by all ports combined - - 200 mA
ESD Protection Human Body Model (HBM) ESD protection level - - 4000 V
Clock Frequency Maximum clock frequency - - 40 MHz
Flash Memory Size Size of non-volatile memory - - 16 KB
RAM Size Size of volatile memory - - 2 KB
Watchdog Timer On-chip watchdog timer - - - -
Low-Voltage Detection On-chip low-voltage detection circuit - - - -
Package Type Type of package - - TSSOP-20 -

Instructions for Use:

  1. Power Supply:

    • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
    • Connect the VDD pin to the power supply and the VSS pin to ground.
  2. Temperature Considerations:

    • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
    • Store the device within the temperature range of -65°C to 150°C.
  3. Current Limitations:

    • Do not exceed the maximum output current of 25mA per port.
    • The total current sourced or sunk by all ports should not exceed 200mA.
  4. ESD Protection:

    • Handle the device with care to avoid ESD damage.
    • Use appropriate ESD protection measures during handling and assembly.
  5. Clock Configuration:

    • Set the clock frequency to a value up to 40MHz for high-speed operations.
    • Configure the internal oscillator or use an external crystal as needed.
  6. Memory Usage:

    • Utilize the 16KB of flash memory for program storage.
    • Use the 2KB of RAM for data storage and variables.
  7. Watchdog Timer:

    • Enable the watchdog timer to prevent system lockup.
    • Configure the watchdog timer settings in your code to suit your application.
  8. Low-Voltage Detection:

    • Enable the low-voltage detection feature to monitor the supply voltage.
    • Configure the threshold and response actions for low-voltage conditions.
  9. Package Handling:

    • Use the TSSOP-20 package type for mounting on the PCB.
    • Follow standard soldering and reflow guidelines for TSSOP packages.
  10. Programming and Debugging:

    • Use an appropriate programmer to upload code to the flash memory.
    • Utilize debugging tools and interfaces to test and troubleshoot your application.
(For reference only)

 Inquiry - TS80L186EB13