Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal of the power supply.
   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Configuration:

   • Set the output voltage (VOUT) by adjusting the external resistors or using the preset value.
   • The output voltage can be set between 1.8V and 5.0V.

3. Load Connection:

   • Connect the load to the output terminals (VOUT and GND).
   • Ensure the load current does not exceed 1.5A.

4. Grounding:

   • Connect the ground (GND) of the input and output to a common ground point.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • The device can operate in temperatures from -40°C to +85°C.

6. Storage:

   • Store the device in a dry environment with temperatures ranging from -65°C to +150°C.

7. Soldering:

   • Use standard soldering techniques suitable for surface mount devices (SMD).
   • Avoid excessive heat during soldering to prevent damage to the component.

8. Testing:

   • After assembly, test the output voltage and current to ensure proper operation.
   • Verify that the quiescent current is within the specified range.