Share:
Specifications
SKU: 5732819
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Part Number | Device Identifier | VL82C311-25FC4 | - |
| Package Type | Encapsulation Style | FC4 | - |
| Operating Temperature Range | Range of temperatures over which the device can operate | -40 to 85 | °C |
| Supply Voltage (Vcc) | Recommended operating voltage | 2.7 to 3.6 | V |
| Maximum Clock Frequency | Highest frequency at which the device can operate | 25 | MHz |
| Output Drive Current | Maximum current that can be sourced or sunk by the output pins | ±8 | mA |
| Standby Current | Current consumption in standby mode | 1 | μA |
| Active Current | Current consumption in active mode | 10 | mA |
| Input Voltage Range | Range of voltages for digital inputs | 0 to Vcc | V |
| Output Voltage High (VOH) | Minimum voltage level for a high output | Vcc - 0.4 | V |
| Output Voltage Low (VOL) | Maximum voltage level for a low output | 0.4 | V |
| Storage Temperature Range | Range of temperatures for storage | -65 to 150 | °C |
| Lead Finish | Surface finish on the leads | Matte Tin | - |
Instructions:
Power Supply:
- Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
- Connect the ground (GND) pin to a stable ground reference.
Clock Configuration:
- Apply a clock signal with a maximum frequency of 25 MHz to the clock input pin.
Input Signals:
- Digital input signals should be within the range of 0V to Vcc.
- Ensure input signals are clean and free from excessive noise.
Output Handling:
- The device can source or sink up to ±8mA per output pin.
- Verify that the load connected to the output pins does not exceed this current limit.
Standby Mode:
- To enter standby mode, set the appropriate control signals as specified in the datasheet.
- In standby mode, the device consumes approximately 1μA of current.
Active Mode:
- In active mode, the device consumes approximately 10mA of current.
- Ensure adequate power supply and heat dissipation to maintain performance.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -65°C to 150°C.
Handling and Storage:
- Handle the device with care to avoid damage to the leads and package.
- Store the device in a dry, cool place to prevent moisture damage.
Soldering:
- Use a soldering iron with a temperature setting appropriate for the matte tin lead finish.
- Follow standard soldering practices to ensure reliable connections.
Inquiry - VL82C311-25FC4
