Instructions for Using AD636JDZ

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 18V.
   • Connect the power supply to the V_CC pin and ground (GND) pin.

2. Input Signal:

   • Apply the input signal to the IN+ and IN- pins.
   • The input frequency should be between 0.1kHz and 500kHz.
   • The common mode input voltage range should be between 0V and 18V.

3. Output Signal:

   • The output voltage (V_OUT) will be available at the OUT pin.
   • The output voltage range is from 0V to 5V.
   • The maximum output current is 10mA.

4. Temperature Considerations:

   • Ensure the operating temperature (T_A) is between -40°C and 85°C.
   • The junction temperature (T_J) should not exceed 125°C.

5. Common Mode Rejection Ratio (CMRR):

   • The device has a typical CMRR of 70dB, which helps in rejecting common mode signals.

6. Power Supply Rejection Ratio (PSRR):

   • The device has a typical PSRR of 70dB, which helps in maintaining stability against power supply variations.

7. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle the device with care to avoid static discharge, which can damage the internal components.

8. Mounting:

   • Solder the device onto the PCB following standard surface mount technology (SMT) procedures.
   • Ensure proper thermal management by providing adequate heat sinking if necessary.

9. Testing:

   • After mounting, test the device to ensure it meets the specified parameters.
   • Use a signal generator and oscilloscope to verify the input and output signals.