Share:
Specifications
SKU: 6321055
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.75 | 5.0 | 5.25 | V | - |
| Input Low Voltage | VIL | 0.8 | - | 2.0 | V | VCC = 5V |
| Input High Voltage | VIH | 3.0 | - | VCC | V | VCC = 5V |
| Output Low Voltage | VOL | 0.25 | 0.4 | 0.5 | V | IOL = 16mA, VCC = 5V |
| Output High Voltage | VOH | 2.7 | 3.5 | 4.0 | V | IOH = -0.4mA, VCC = 5V |
| Input Leakage Current | IIL | -1.0 | -0.4 | 0.4 | μA | VCC = 5V |
| Output Leakage Current | IOL | -1.0 | -0.4 | 0.4 | μA | VCC = 5V |
| Propagation Delay Time | tpd | - | 9 | 15 | ns | VCC = 5V, TA = 25°C |
| Power Dissipation | PD | - | - | 100 | mW | Per Package |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- Apply input signals within the valid logic levels: VIL ≤ 0.8V for a low signal and VIH ≥ 3.0V for a high signal.
- Be aware of the input leakage current (IIL) which can affect the driving circuit.
Output Signals:
- The output signals will be VOL ≤ 0.5V for a low signal and VOH ≥ 2.7V for a high signal under typical conditions.
- Ensure the load does not exceed the maximum output current ratings.
Propagation Delay:
- The propagation delay time (tpd) is typically 9ns but can vary up to 15ns depending on temperature and supply voltage.
Power Dissipation:
- The total power dissipation should not exceed 100mW per package to avoid overheating.
Operating Temperature:
- The device is designed to operate within the commercial temperature range (0°C to 70°C).
Handling:
- Handle the device with care to avoid static damage. Use appropriate ESD protection measures.
Storage:
- Store the device in a dry, cool place away from direct sunlight and moisture.
Inquiry - SN74ALS541-1NS
