Share:
Specifications
SKU: 6381439
Dual 2-Bit Bistable Transparent Latch
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V | |
| Input High Voltage | VIH | 2.0 | - | VCC | V | |
| Input Low Voltage | VIL | 0 | - | 0.8 | V | |
| Output High Voltage | VOH | 2.4 | - | VCC - 0.1 | V | |
| Output Low Voltage | VOL | 0 | - | 0.4 | V | |
| Input Leakage Current | IIL | -1.0 | - | 1.0 | μA | |
| Output Leakage Current | IOL | -1.0 | - | 1.0 | μA | |
| Propagation Delay Time | tpd | - | 9 | 22 | ns | @ VCC = 5V, TA = 25°C |
| Power Dissipation | PD | - | - | 100 | mW | |
| Operating Temperature Range | TA | -40 | - | 85 | °C | |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C |
Instructions for Use
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V.
- Connect the ground (GND) pin to a stable reference potential.
Input Signals:
- Apply input signals (VIH and VIL) that meet the specified voltage levels.
- Ensure input signals do not exceed the supply voltage or go below ground.
Output Signals:
- The output high (VOH) and low (VOL) voltages should be within the specified limits.
- Avoid loading the output with excessive current to prevent damage.
Propagation Delay:
- The propagation delay time (tpd) is typically 9 ns at 5V and 25°C. Adjust your timing accordingly.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device in an environment between -65°C and 150°C.
Handling:
- Handle the device with care to avoid static discharge, which can damage sensitive components.
- Follow proper soldering techniques to ensure reliable connections.
Testing:
- Verify all connections and parameters before applying power to the device.
- Use a multimeter to check for short circuits and open circuits.
By following these guidelines, you can ensure optimal performance and longevity of the CD74HCT75E.
(For reference only)Inquiry - CD74HCT75E
