Instructions for Using 25Q80BSIG

1. Power Supply:

   • Ensure the supply voltage is within the range of 1.7V to 3.6V.
   • Connect the Vcc pin to the positive power supply and GND to the ground.

2. Temperature Considerations:

   • The device operates reliably between -40°C and 85°C.
   • Store the device in an environment with temperatures ranging from -40°C to 85°C.

3. Programming:

   • Use the Write Page command to program data.
   • Programming time per page is typically 2.5ms and can take up to 5ms.

4. Erasing:

   • Use the Sector Erase or Block Erase commands to erase memory.
   • Sector erase time is typically 250ms and can take up to 350ms.
   • Block erase time is typically 2000ms and can take up to 3000ms.

5. Data Retention:

   • Data retention is guaranteed for at least 20 years under normal operating conditions.

6. Endurance:

   • The device supports up to 100,000 write/erase cycles.

7. Capacity:

   • The 25Q80BSIG has a capacity of 8 Mbit (1 MByte).

8. Package:

   • The device comes in an 8-pin SOIC package.

9. Pin Configuration:

   • 1 (Vcc): Power supply
   • 2 (GND): Ground
   • 3 (SI): Serial data input
   • 4 (SCK): Serial clock
   • 5 (CS): Chip select
   • 6 (HOLD): Hold (used to pause ongoing operations)
   • 7 (WP): Write protect (used to prevent accidental writes)
   • 8 (SO): Serial data output

10. Commands:

    • Refer to the device datasheet for a complete list of commands and their respective opcodes.

11. Handling:

    • Handle the device with care to avoid static damage.
    • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.