Share:
Specifications
SKU: 6405368
CPLD 25NS LOW PWR 100PIN TQFP
| Parameter | Description | Value |
|---|---|---|
| Device | Device Type | ATF1504ASL-25AU100 |
| Package | Package Type | 100-Pin TQFP (Thinning Quad Flat Package) |
| Operating Voltage (Vcc) | Supply Voltage Range | 3.3V to 5.5V |
| I/O Voltage (Vio) | Input/Output Voltage Range | 3.3V to 5.5V |
| Clock Frequency | Maximum Clock Frequency | 200 MHz |
| Configuration Mode | Configuration Methods | ISP (In-System Programming), JTAG, Parallel, Serial |
| Memory | User Flash Memory Size | 256 Kbits |
| Macrocells | Number of Macrocells | 480 |
| Inputs | Number of Inputs | 144 |
| Outputs | Number of Outputs | 96 |
| I/O Pins | Number of I/O Pins | 72 |
| Internal Oscillator | Internal Oscillator Frequency Range | 1 MHz to 50 MHz |
| External Oscillator | External Oscillator Frequency Range | 1 MHz to 200 MHz |
| Power Consumption | Typical Power Consumption at 5V | 100 mW (at 100 MHz) |
| Operating Temperature | Operating Temperature Range | -40°C to +85°C |
| Storage Temperature | Storage Temperature Range | -65°C to +150°C |
| ESD Protection | Human Body Model (HBM) ESD Rating | 2000 V |
| Lead Finish | Lead Finish | Matte Tin |
Instructions for ATF1504ASL-25AU100
Power Supply:
- Ensure that the supply voltage (Vcc) is within the specified range of 3.3V to 5.5V.
- Connect the ground (GND) pin to a stable ground reference.
Configuration:
- Use one of the supported configuration methods (ISP, JTAG, Parallel, Serial) to program the device.
- For ISP, ensure that the programming interface is connected correctly and the programming software is set up properly.
Clocking:
- The device supports both internal and external oscillators. Configure the clock source according to the application requirements.
- For external oscillators, connect the oscillator to the designated pins and ensure it operates within the frequency range of 1 MHz to 200 MHz.
Input/Output Handling:
- Ensure that all input and output signals are within the specified voltage range (3.3V to 5.5V).
- Use appropriate pull-up or pull-down resistors if necessary to maintain signal integrity.
Temperature Considerations:
- Operate the device within the specified temperature range of -40°C to +85°C to avoid damage or malfunction.
- Store the device in an environment with a temperature range of -65°C to +150°C.
Electrostatic Discharge (ESD) Protection:
- Handle the device with care to avoid ESD damage. Use proper ESD protection measures such as wrist straps and ESD-safe workstations.
- The device has a Human Body Model (HBM) ESD rating of 2000 V, but it is still important to follow ESD guidelines.
Soldering and Handling:
- Follow the recommended soldering profile for the 100-Pin TQFP package to ensure reliable connections.
- Avoid excessive heat during soldering to prevent damage to the device.
Testing and Validation:
- After programming and assembly, perform functional tests to verify the correct operation of the device.
- Use diagnostic tools and test patterns to validate the configuration and performance.
By following these instructions, you can ensure the proper operation and longevity of the ATF1504ASL-25AU100 device.
(For reference only)Inquiry - ATF1504ASL-25AU100
