Share:
Specifications
SKU: 6420958
| Parameter | Value | Description |
|---|---|---|
| Part Number | FW389-TL-2W | - |
| Type | LED Driver | - |
| Input Voltage | 100-240V AC | Operating voltage range |
| Output Voltage | 24V DC | Constant output voltage |
| Output Current | 0.083A (83mA) | Maximum continuous current |
| Power | 2W | Maximum power output |
| Efficiency | >85% | Efficiency at rated load |
| Protection | Overvoltage, Short Circuit, Overload | Built-in protection features |
| Operating Temperature | -20°C to +60°C | Ambient temperature range for operation |
| IP Rating | IP20 | Ingress Protection rating |
| Dimensions | 35mm x 25mm x 15mm | Length x Width x Height |
| Weight | 20g | Approximate weight |
| Certifications | CE, RoHS | Compliance with standards |
Instructions:
Installation:
- Ensure the input voltage matches the specified range (100-240V AC).
- Connect the LED driver to the power source and the LED load according to the wiring diagram provided.
- Secure the driver in a well-ventilated area to prevent overheating.
Operation:
- Turn on the power supply to start the LED operation.
- Monitor the temperature and ensure it stays within the operating range (-20°C to +60°C).
Maintenance:
- Regularly inspect connections for any signs of wear or damage.
- Clean the driver with a dry cloth to remove dust and debris.
Troubleshooting:
- If the LED does not light up, check the power supply and connections.
- If the driver is overheating, ensure proper ventilation and check for any short circuits.
Storage:
- Store the driver in a dry, cool place away from direct sunlight and extreme temperatures.
Disposal:
- Dispose of the driver according to local regulations for electronic waste.
Inquiry - FW389-TL-2W
