Instructions for Using the EX5404:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.0V to 6.0V.
   • Connect the Vcc pin to the positive power supply and the GND pin to the ground.

2. Input Signals:

   • For a high-level input (VIH), the voltage should be at least 2.0V and can go up to the supply voltage (Vcc).
   • For a low-level input (VIL), the voltage should be between 0V and 0.8V.

3. Output Signals:

   • The high-level output current (IOH) can source up to 4.0mA.
   • The low-level output current (IOL) can sink up to 16.0mA.

4. Propagation Delay:

   • The propagation delay time (tPLH and tPHL) is typically 20ns, which is the time it takes for the output to change state after the input changes.

5. Power Dissipation:

   • Ensure that the power dissipation does not exceed 360mW to avoid overheating and potential damage to the device.

6. Temperature Considerations:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is from -65°C to 150°C.

7. Handling and Storage:

   • Store the device in a dry environment within the specified storage temperature range.
   • Handle the device with care to avoid static discharge, which can damage the sensitive components.

8. Application Notes:

   • Refer to the datasheet for specific application notes and circuit diagrams to ensure proper integration into your design.