Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Input signals should be within the specified input voltage levels:
     • Low level (V_IL): 0.8V or less
     • High level (V_IH): 2.0V or greater

3. Output Signals:

   • Output signals will be within the following levels:
     • Low level (V_OL): 0.4V or less
     • High level (V_OH): 2.4V or greater

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 15 nanoseconds. This is the time it takes for the output to respond to a change in the input signal.

5. Power Dissipation:

   • The maximum power dissipation (P_tot) is 350 milliwatts. Ensure that the device is not operated beyond this limit to avoid overheating.

6. Temperature Range:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_stg) is from -65°C to 150°C.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling the device.

8. Mounting:

   • Ensure proper mounting on the PCB to maintain good thermal management and mechanical stability.

9. Testing:

   • Before finalizing the design, test the device under various conditions to ensure it meets the required performance specifications.

10. Documentation:

    • Refer to the datasheet for detailed information and specific application notes.