Instructions for Use:

1. Power Supply:

   • Connect the Vcc pin to a stable power supply within the range of 3.3V to 5.5V.
   • Ensure the ground (GND) is properly connected.

2. Configuration:

   • Program the device using In-System Programming (ISP) via the JTAG interface.
   • Use Lattice Diamond or ispLEVER software for programming and configuration.

3. I/O Handling:

   • Configure the I/O pins as inputs or outputs based on your application requirements.
   • Ensure that all unused I/O pins are tied to Vcc or GND to prevent floating states.

4. Operating Conditions:

   • Operate the device within the specified temperature range to ensure reliable performance.
   • Avoid exposing the device to temperatures outside the storage temperature range.

5. Handling Precautions:

   • Handle the device with care to avoid damage from static electricity.
   • Use appropriate ESD protection measures when handling the device.

6. Mounting:

   • Solder the device onto the PCB using standard reflow soldering techniques.
   • Ensure proper alignment and soldering of all pins.

7. Testing:

   • After mounting, test the device to ensure it is functioning correctly.
   • Use boundary-scan testing via the JTAG interface to verify connections and functionality.