Share:
Specifications
SKU: 7416317
Modem
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | EV8010ILPT |
| Type | Component type | Voltage Regulator |
| Function | Primary function | Linear Voltage Regulator |
| Input Voltage Range | Range of input voltages it can handle | 2.7V to 5.5V |
| Output Voltage | Fixed or adjustable output voltage | 3.3V (Fixed) |
| Output Current | Maximum continuous output current | 150mA |
| Quiescent Current | Current consumed by the regulator when no load is applied | 50μA (typical) |
| Dropout Voltage | Minimum difference between input and output voltage for regulation | 200mV (max) at 150mA |
| Operating Temperature Range | Range of temperatures over which the device is guaranteed to operate | -40°C to +85°C |
| Package Type | Physical package of the component | SOT-23-5 |
| Storage Temperature Range | Range of temperatures over which the device can be stored | -65°C to +150°C |
| Thermal Resistance (θJA) | Thermal resistance from junction to ambient air | 185°C/W |
| Protection Features | Built-in protection mechanisms | Overcurrent Protection, Thermal Shutdown |
Instructions for Use:
Power Supply Connection:
- Connect the input voltage (VIN) to the pin labeled "IN".
- Connect the ground (GND) to the pin labeled "GND".
- Connect the output voltage (VOUT) to the pin labeled "OUT".
Capacitors:
- Place a 1μF ceramic capacitor between VIN and GND as close to the regulator as possible.
- Place a 1μF ceramic capacitor between VOUT and GND as close to the regulator as possible.
Heat Dissipation:
- Ensure adequate heat dissipation if the regulator is operating near its maximum output current. The thermal resistance (θJA) should be considered to avoid overheating.
PCB Layout:
- Keep the traces short and wide to minimize inductance and resistance.
- Ensure proper grounding and decoupling to maintain stability and reduce noise.
Overcurrent and Thermal Protection:
- The EV8010ILPT has built-in overcurrent and thermal shutdown features to protect against excessive load and temperature conditions. However, it is recommended to design the system to avoid these conditions to ensure reliable operation.
Storage and Handling:
- Store the device in a dry, cool place within the specified storage temperature range.
- Handle with care to avoid damage to the pins and the package. Use appropriate ESD (Electrostatic Discharge) precautions.
Inquiry - EV8010ILPT
