Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 1.8V to 5.5V.
   • Do not exceed the maximum supply voltage to avoid damaging the device.

2. Output Current (Iout):

   • The typical output current is 200mA, with a maximum of 300mA.
   • Do not exceed the maximum output current to prevent overheating and potential failure.

3. Quiescent Current (Iq):

   • The quiescent current is typically 1.5μA and can go up to 2.5μA.
   • This low quiescent current makes the device suitable for battery-powered applications.

4. Dropout Voltage (Vdo):

   • The dropout voltage is typically 200mV and can go up to 300mV.
   • Ensure that the input voltage is at least this much higher than the output voltage to maintain regulation.

5. Line Regulation:

   • The line regulation is typically 0.1% per volt.
   • This indicates how well the output voltage remains stable when the input voltage changes.

6. Load Regulation:

   • The load regulation is typically 0.1% per milliamp.
   • This indicates how well the output voltage remains stable when the load current changes.

7. Thermal Shutdown (TSD):

   • The device will shut down at approximately 160°C to protect against overheating.
   • Ensure proper heat dissipation to prevent reaching this temperature.

8. Operating Temperature (Topr):

   • The operating temperature range is from -40°C to 85°C.
   • Ensure the device operates within this temperature range to avoid performance issues.

9. Storage Temperature (Tstg):

   • The storage temperature range is from -65°C to 150°C.
   • Store the device within this temperature range to prevent damage.

10. Mounting and Handling:

    • Handle the device with care to avoid static discharge and physical damage.
    • Follow recommended soldering profiles and PCB layout guidelines to ensure reliable operation.