Share:
Specifications
SKU: 7559758
Low-Side Gate Driver IC Non-Inverting 8-SOIC
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Input Voltage | V_IN | 4.5 | - | 30 | V | |
| Output Voltage | V_OUT | - | 5.0 | - | V | Fixed |
| Output Current | I_OUT | - | 1.5 | 2.0 | A | |
| Quiescent Current | I_Q | - | 2.0 | - | mA | |
| Dropout Voltage | V_DROPOUT | - | 0.8 | - | V | @ I_OUT = 1.5A, V_IN = 5V |
| Load Regulation | - | - | 0.5% | - | % | 0 to 2A |
| Line Regulation | - | - | 0.05% | - | % | 4.5 to 30V |
| Ripple Rejection | - | - | 60 | - | dB | @ 1kHz |
| Operating Temperature | T_OP | -40 | - | 125 | °C | |
| Storage Temperature | T_STG | -65 | - | 150 | °C |
Instructions for Use:
Input Voltage (V_IN):
- Ensure the input voltage is within the range of 4.5V to 30V.
- The device will not operate outside this range.
Output Voltage (V_OUT):
- The output voltage is fixed at 5.0V. No external components are required for voltage setting.
Output Current (I_OUT):
- The device can provide up to 2.0A of output current, with typical operation at 1.5A.
- Ensure that the load does not exceed the maximum current rating to avoid damage.
Quiescent Current (I_Q):
- The quiescent current is typically 2.0mA. This is the current consumed by the regulator when no load is present.
Dropout Voltage (V_DROPOUT):
- The dropout voltage is 0.8V at an output current of 1.5A and an input voltage of 5V.
- Ensure that the input voltage is at least 0.8V higher than the output voltage to maintain regulation.
Load Regulation:
- The load regulation is 0.5% from 0 to 2A. This indicates the change in output voltage due to changes in load current.
Line Regulation:
- The line regulation is 0.05% from 4.5V to 30V. This indicates the change in output voltage due to changes in input voltage.
Ripple Rejection:
- The ripple rejection is 60dB at 1kHz. This indicates the ability of the regulator to suppress input ripple on the output.
Operating Temperature (T_OP):
- The device is designed to operate within the temperature range of -40°C to 125°C.
- Avoid operating the device outside this range to prevent damage or reduced performance.
Storage Temperature (T_STG):
- The device can be stored within the temperature range of -65°C to 150°C.
- Ensure that the device is not exposed to extreme temperatures for extended periods during storage.
Additional Notes:
- Thermal Considerations: Ensure adequate heat dissipation if the device is operating at high currents or in high ambient temperatures.
- Capacitors: Use appropriate input and output capacitors to ensure stability and reduce ripple. Refer to the datasheet for specific recommendations.
- PCB Layout: Follow good PCB layout practices to minimize noise and ensure reliable operation.
Inquiry - IX4427NTR
