Instructions for Use:

1. Forward Current (IF):

   • Ensure that the forward current does not exceed 20 mA to avoid damaging the device.
   • Typical operating current is 10 mA.

2. Peak Reverse Voltage (VRRM):

   • The device can withstand a peak reverse voltage up to 1200 V. Do not exceed this value to prevent breakdown.

3. Maximum Repetitive Peak Current (IORM):

   • The maximum repetitive peak current should not exceed 1.5 A to ensure reliable operation.

4. Forward Voltage (VF):

   • The forward voltage drop across the device is typically 1.3 V at a forward current of 10 mA. It ranges from 1.1 V to 1.6 V.

5. Reverse Leakage Current (IR):

   • At a reverse voltage of 700 V, the reverse leakage current should not exceed 500 nA. Typical leakage is around 100 nA.

6. Isolation Voltage (VIORM):

   • The isolation voltage between input and output is rated at 5000 Vrms. This ensures high insulation performance.

7. Propagation Delay Time (tPD):

   • The propagation delay time, which is the time taken for the signal to travel from input to output, ranges from 10 ns to 40 ns with a typical value of 25 ns.

8. Rise Time (tr) and Fall Time (tf):

   • Both rise and fall times are within the range of 10 ns to 40 ns, with a typical value of 25 ns. These parameters are crucial for high-speed applications.

9. Operating Temperature (TOPR):

   • The device can operate within a temperature range of -40°C to 105°C. Ensure that the ambient temperature does not exceed these limits.

10. Storage Temperature (TSTG):

    • When storing the device, keep it within a temperature range of -55°C to 125°C to maintain its integrity.

Additional Notes:

• Always refer to the datasheet for detailed specifications and application notes.
• Proper heat sinking may be required for continuous operation at higher currents or temperatures.
• Ensure that all connections are secure and meet the electrical requirements specified.