Instructions:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads or body.

2. Installation:

   • Ensure the resistor is correctly oriented before soldering.
   • Use a soldering iron with a temperature setting no higher than 350°C.
   • Avoid applying excessive heat for prolonged periods to prevent damage.

3. Soldering:

   • Apply solder to the leads and pads simultaneously to ensure a strong connection.
   • Allow the solder to cool naturally without moving the component.

4. Testing:

   • Use a multimeter to verify the resistance value after installation.
   • Check for any short circuits or open circuits in the circuit.

5. Maintenance:

   • Regularly inspect the resistor for signs of damage or wear.
   • If necessary, replace the resistor with a new one of the same specifications.

6. Disposal:

   • Dispose of the component in accordance with local environmental regulations.
   • Recycle if possible.