Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Operating Temperature (Topr):

   • The device operates reliably between -40°C and 85°C. Avoid operating outside this range to prevent performance degradation or failure.

3. Storage Temperature (Tstg):

   • Store the device in an environment where the temperature ranges from -40°C to 150°C.

4. Output Current (Sink/Source):

   • The device can sink or source up to 100mA at Vcc = 5V and Ta = 25°C. Ensure that the load does not exceed these limits to avoid overheating or damage.

5. Input Current (High/Low):

   • When the input is high (Vin = 5V), the input current should be between 1μA and 10μA.
   • When the input is low (Vin = 0V), the input current should be between -10μA and -1μA.

6. Propagation Delay Time (tpd):

   • The propagation delay time is the time it takes for the output to respond to a change in the input. It ranges from 10ns to 50ns under typical conditions (Vcc = 5V, Ta = 25°C).

7. Power Dissipation (Pd):

   • The maximum power dissipation is 1.5W at 25°C ambient temperature. For higher temperatures, derate the power dissipation to ensure the device remains within safe operating limits.

8. Mounting:

   • Use appropriate heat sinks if the device is expected to dissipate significant power. Ensure good thermal management to keep the junction temperature within safe limits.

9. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components. Use ESD protection when handling the device.

10. Package:

    • The TK8A65D K8A65D is available in a TO-220F package. Ensure proper soldering techniques are used to avoid mechanical stress and ensure reliable electrical connections.