Share:
Specifications
SKU: 8648230
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Input Voltage | VIN | 3.3 | - | 5.5 | V | Operating range |
| Output Voltage | VOUT | 2.5 | - | 2.5 | V | Fixed output voltage |
| Output Current (Max) | IOUT | - | - | 1.5 | A | Continuous output current |
| Efficiency (Typical) | η | - | 90 | - | % | At full load |
| Quiescent Current | IQ | - | 10 | - | μA | Shutdown mode |
| Dropout Voltage | VDROPOUT | - | 0.2 | - | V | At IOUT = 1.5A |
| Load Regulation | ΔVOUT/ΔIOUT | - | 0.5 | - | % | From 0 to 1.5A |
| Line Regulation | ΔVOUT/ΔVIN | - | 0.1 | - | % | Over input voltage range |
| Ripple Rejection | RR | - | 60 | - | dB | At 1kHz |
| Operating Temperature | Toper | -40 | - | 85 | °C | Storage and operation |
| Storage Temperature | Tstg | -40 | - | 125 | °C | Non-operating |
| Package Type | - | - | - | - | SOT-23-5 | - |
Instructions for Use:
Input Voltage:
- Ensure the input voltage is within the specified range of 3.3V to 5.5V.
- Do not exceed the maximum input voltage to avoid damaging the device.
Output Voltage:
- The output voltage is fixed at 2.5V. No external components are required to set this voltage.
Output Current:
- The maximum continuous output current is 1.5A. Ensure that the load does not exceed this limit to prevent overheating or damage.
Efficiency:
- The typical efficiency is 90% at full load. This value can vary slightly depending on the specific application conditions.
Quiescent Current:
- In shutdown mode, the quiescent current is typically 10μA. This low current draw helps in reducing power consumption when the device is not active.
Dropout Voltage:
- The dropout voltage is typically 0.2V at a load current of 1.5A. This ensures that the output remains stable even when the input voltage is close to the output voltage.
Load Regulation:
- The load regulation is typically 0.5%, meaning the output voltage will change by 0.5% for a full load step from 0 to 1.5A.
Line Regulation:
- The line regulation is typically 0.1%, indicating that the output voltage will change by 0.1% for a full input voltage range from 3.3V to 5.5V.
Ripple Rejection:
- The ripple rejection is typically 60dB at 1kHz, which helps in filtering out input voltage noise and maintaining a clean output.
Operating Temperature:
- The device can operate over a temperature range of -40°C to 85°C. Ensure that the ambient temperature does not exceed these limits to maintain reliable operation.
Storage Temperature:
- The storage temperature range is -40°C to 125°C. Store the device in a dry and cool environment to prevent damage.
Package Type:
- The device is packaged in a SOT-23-5 package. Ensure proper handling and soldering techniques to avoid mechanical stress or damage.
Additional Notes:
- Always refer to the datasheet for the most accurate and detailed information.
- Use appropriate decoupling capacitors (typically 10μF and 0.1μF) on both the input and output sides to ensure stability and reduce noise.
- Ensure good thermal management, especially when operating at high output currents, to prevent overheating.
Inquiry - TA48M025F(TE16L)
