Share:
Specifications
SKU: 8648534
| Parameter | Description | Value |
|---|---|---|
| Part Number | NTC Thermistor | NTC10D-13 |
| Type | Negative Temperature Coefficient (NTC) | |
| Resistance at 25°C | Nominal Resistance at 25°C | 10,000 Ω ± 1% |
| Beta (B) Value | Thermal Sensitivity Index (25/85°C) | 3950 K ± 1% |
| Operating Range | Temperature Range | -40°C to +125°C |
| Dissipation Constant (δ) | Power Required to Raise Temperature by 1°C | 1.2 mW/°C |
| Time Constant (τ) | Time to Reach 63.2% of Temperature Change | 10 seconds |
| Lead Spacing | Distance Between Leads | 2.54 mm |
| Lead Diameter | Diameter of Leads | 0.5 mm |
| Body Size | Dimensions of the Thermistor | 3.0 x 3.0 x 1.5 mm |
| Material | Thermistor Material | Sintered Metal Oxide |
| Package | Housing Type | Glass Epoxy |
| Tolerance | Resistance Tolerance at 25°C | ± 1% |
| Stability | Long-Term Stability | ± 0.2% per year |
| Response Time | Time to Reach 90% of Final Value | 15 seconds |
Instructions for Use:
Handling:
- Handle the NTC10D-13 with care to avoid mechanical stress or damage.
- Do not apply excessive force to the leads during soldering or handling.
Soldering:
- Use a soldering iron with a temperature not exceeding 350°C.
- Soldering time should not exceed 3 seconds per joint.
- Allow the thermistor to cool naturally after soldering to prevent thermal shock.
Mounting:
- Ensure the thermistor is securely mounted to maintain accurate temperature readings.
- Avoid direct contact with heat sources that could affect the measurement accuracy.
Electrical Connections:
- Connect the leads to the circuit as specified in your application design.
- Ensure proper insulation to prevent short circuits.
Calibration:
- Calibrate the thermistor using a known temperature source to ensure accurate readings.
- Use the beta (B) value and resistance at 25°C to calculate the temperature based on the measured resistance.
Storage:
- Store the thermistor in a dry, cool place away from direct sunlight and extreme temperatures.
- Keep the thermistor in its original packaging until ready for use to protect it from environmental factors.
Testing:
- Test the thermistor regularly to ensure it is functioning within the specified parameters.
- Replace the thermistor if it shows signs of degradation or if it no longer meets the required specifications.
By following these instructions, you can ensure optimal performance and longevity of the NTC10D-13 thermistor.
(For reference only)Inquiry - NTC10D-13
