Share:
Specifications
SKU: 8656907
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | TE28F640J3C115 |
| Type | Flash Memory | |
| Density | Total memory capacity | 64 Mbit |
| Organization | Memory organization | 8 M x 8 |
| Vcc (Supply Voltage) | Operating voltage range | 2.7V to 3.6V |
| Vpp (Programming Voltage) | Programming voltage range | Not applicable |
| Temperature Range | Operating temperature range | -40°C to +85°C |
| Package | Package type | TSOP-48 |
| Speed | Access time | 70 ns |
| Data Retention | Data retention time | 10 years |
| Endurance | Write/erase cycles | 100,000 |
| Programming Algorithm | Standard programming algorithm | JEDEC compliant |
| Pin Configuration | Pin configuration diagram | Refer to datasheet |
| Features | - Sector protection - Auto select mode - Low power consumption |
|
| Applications | - Embedded systems - Networking equipment - Industrial control |
Instructions for Use:
Power Supply:
- Ensure that the supply voltage (Vcc) is within the specified range of 2.7V to 3.6V.
- Connect the Vcc pin to the positive supply and the GND pin to the ground.
Programming:
- Use a standard JEDEC compliant programming algorithm for writing data to the memory.
- The device supports sector protection to prevent accidental writes or erases.
Access Time:
- The access time is 70 ns. Ensure that your system timing is configured to accommodate this delay.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
Endurance and Data Retention:
- The device can withstand up to 100,000 write/erase cycles.
- Data retention is guaranteed for up to 10 years under normal operating conditions.
Pin Configuration:
- Refer to the pin configuration diagram in the datasheet to correctly connect the device to your system.
Low Power Consumption:
- The device is designed for low power consumption, making it suitable for battery-powered applications.
Auto Select Mode:
- The auto select mode allows the device to automatically configure itself based on the input signals, simplifying system design.
For detailed information and specific application notes, refer to the full datasheet provided by the manufacturer.
(For reference only)Inquiry - TE28F640J3C115
