Instructions for Use:

1. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Use a suitable heat sink to dissipate heat effectively.
   • Apply thermal compound between the transistor and the heat sink for better thermal conductivity.

2. Electrical Connections:

   • Connect the collector (C) to the high voltage side of the circuit.
   • Connect the emitter (E) to the low voltage side or ground.
   • Connect the base (B) to the control signal source.
   • Ensure all connections are secure and insulated to prevent short circuits.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Operate within the recommended temperature range to avoid damage.
   • Use appropriate current limiting resistors to protect the base-emitter junction.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

5. Testing:

   • Before installation, test the transistor using a multimeter to ensure it is functioning correctly.
   • Check for continuity and resistance values as per the datasheet specifications.

6. Safety Precautions:

   • Always disconnect power before making any connections or modifications.
   • Use proper grounding techniques to prevent electrical shock.
   • Wear protective gear such as gloves and safety glasses when handling the transistor.