Share:
Specifications
SKU: 8799360
| Parameter | Description | Value |
|---|---|---|
| Part Number | Unique identifier for the component | J2-Q06B-E-W |
| Type | Type of component | Connector |
| Series | Series of the connector | J2 |
| Contact Material | Material used for the contacts | Brass |
| Contact Plating | Plating material on the contacts | Gold |
| Number of Positions | Number of contact positions | 6 |
| Pitch | Distance between contact centers | 2.54 mm |
| Mounting Type | Method of mounting | Through-Hole |
| Termination | Method of connecting wires | Crimp |
| Rated Current | Maximum current per contact | 3 A |
| Rated Voltage | Maximum voltage | 250 VAC |
| Insulation Material | Material used for insulation | PBT |
| Operating Temperature Range | Temperature range for operation | -40°C to +85°C |
| Insertion Force | Force required to insert a pin | 1.5 N to 3.5 N |
| Pull-Out Force | Force required to pull out a pin | 15 N min |
| Color | Color of the connector | Black |
| RoHS Compliance | Compliance with RoHS standards | Yes |
Instructions:
Preparation:
- Ensure that the wires to be connected are stripped to the correct length as specified in the crimp terminal datasheet.
- Use a crimp tool appropriate for the terminal size.
Assembly:
- Insert the crimped terminals into the corresponding positions in the connector housing.
- Ensure that the terminals are fully seated and securely locked in place.
Inspection:
- Visually inspect the assembled connector to ensure all terminals are properly inserted and no wires are damaged or exposed.
- Check the insertion force and pull-out force to ensure they meet the specified values.
Installation:
- Mount the connector on the PCB or chassis using the through-hole method.
- Solder the leads if necessary, ensuring good solder joints.
Testing:
- Test the electrical continuity and insulation resistance of the assembled connector to ensure proper functionality.
- Verify that the operating temperature range is suitable for the application environment.
Storage:
- Store the connectors in a dry, clean environment to prevent corrosion and damage.
- Keep the connectors away from direct sunlight and extreme temperatures.
Inquiry - J2-Q06B-E-W
