Share:
Specifications
SKU: 8803010
| Parameter | Description | Value |
|---|---|---|
| Model Number | Model Identification | NC2D-DC24V |
| Type | Relay Type | Latching Relay |
| Supply Voltage | Operating Voltage | DC 24V |
| Coil Resistance | Coil Resistance at 20°C | 1200Ω ±10% |
| Power Consumption | Power Consumption at Rated Voltage | 480mW |
| Contact Form | Contact Configuration | SPDT (1C) |
| Contact Rating | Maximum Switching Capacity | 5A, 250VAC |
| Insulation Resistance | Insulation Resistance at 500VDC | >100MΩ |
| Dielectric Strength | Dielectric Strength Between Contacts | 1000VAC for 1 minute |
| Mechanical Life | Mechanical Life (No Load) | 10 million operations |
| Electrical Life | Electrical Life (Rated Load) | 100,000 operations |
| Operating Temperature | Operating Temperature Range | -40°C to +85°C |
| Storage Temperature | Storage Temperature Range | -40°C to +125°C |
| Humidity | Relative Humidity | 5% to 95% RH, non-condensing |
| Weight | Weight | 10g |
| Dimensions | Dimensions (L x W x H) | 17.5mm x 12.5mm x 12.5mm |
Instructions
Installation:
- Ensure the relay is installed in a clean, dry environment.
- Mount the relay on a flat, stable surface to avoid mechanical stress.
Wiring:
- Connect the relay coil terminals to the DC 24V power supply.
- Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
Operation:
- Apply the rated voltage to the coil to energize the relay.
- The relay will switch the contacts accordingly (NO to COM or NC to COM).
- To de-energize, remove the voltage from the coil.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Do not exceed the maximum ratings specified in the parameter table.
- Avoid exposure to extreme temperatures and humidity.
Safety:
- Ensure the relay is disconnected from the power source before performing any maintenance or inspection.
- Use appropriate personal protective equipment (PPE) when handling electrical components.
Inquiry - NC2D-DC24V
