Share:
Specifications
SKU: 8806715
Electric Fuse, Super Fast Blow, 200A, 250VAC, 400VDC, 10000A (IR), Inline/holder,
| Parameter | Description |
|---|---|
| Model | CR2L-200/UL |
| Type | Relay |
| Contact Form | SPDT (Single Pole Double Throw) |
| Rated Voltage | 24V DC |
| Rated Current | 10A per contact |
| Coil Voltage | 24V DC |
| Coil Power Consumption | 1.2W |
| Insulation Resistance | 100MΩ or more (500VDC) |
| Dielectric Strength | 2500VAC for 1 minute |
| Mechanical Life | 10 million operations (min.) |
| Electrical Life | 100,000 operations (min.) at rated load |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +125°C |
| Humidity | 5% to 95% RH, non-condensing |
| Mounting Position | Any position |
| Terminal Type | Quick-connect terminals |
| Weight | 20g |
Instructions:
Installation:
- Ensure the relay is installed in a location that meets the operating temperature and humidity requirements.
- Use quick-connect terminals to connect the relay to the circuit.
- Mount the relay securely to prevent mechanical stress.
Wiring:
- Connect the coil terminals to the control circuit using the appropriate voltage (24V DC).
- Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit as required.
Operation:
- Apply the rated coil voltage to energize the relay, which will switch the contacts from NC to NO.
- Remove the coil voltage to de-energize the relay, which will switch the contacts back to NC.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the relay with a dry cloth to remove dust and debris.
- Do not use solvents or abrasive materials that could damage the relay.
Safety:
- Ensure the relay is disconnected from power before performing any maintenance or inspection.
- Follow all local electrical codes and safety regulations when installing and using the relay.
- Do not exceed the rated voltage and current specifications to avoid damage or failure.
Inquiry - CR2L-200/UL
