Share:
Specifications
SKU: 8847837
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Breakdown Voltage | V(BR) | - | 30 | - | V | Minimum reverse voltage |
| Maximum Repetitive Peak Reverse Voltage | V(RRM) | - | 45 | - | V | Peak reverse voltage |
| Maximum Average Forward Rectified Current (Tc=75°C) | IF(AV) | - | 12 | - | A | Continuous forward current |
| Non-Repetitive Peak Forward Surge Current (8.3/400μs) | IFSM | - | 120 | - | A | Peak surge current |
| Forward Voltage Drop (IF=12A, Tc=75°C) | V(F) | - | 1.2 | - | V | Voltage drop at rated current |
| Reverse Leakage Current (VR=30V, Tj=25°C) | IR | - | 100 | - | μA | Leakage current at rated voltage |
| Junction Capacitance (VR=0V, f=1MHz) | Cj | - | 10 | - | pF | Capacitance at zero bias |
| Operating Temperature Range | Tj | -55 | - | 150 | °C | Junction temperature range |
| Storage Temperature Range | Tstg | -65 | - | 150 | °C | Storage temperature range |
Instructions for Use:
Mounting:
- Ensure proper heat sinking to maintain the junction temperature within the specified range.
- Use appropriate mounting hardware to secure the device.
Wiring:
- Connect the anode (A) to the positive side of the circuit.
- Connect the cathode (K) to the negative side of the circuit.
Surge Handling:
- The device can handle non-repetitive peak forward surge currents up to 120A for 8.3/400μs pulses. Ensure that the surge conditions do not exceed these limits.
Thermal Management:
- Monitor the junction temperature to ensure it does not exceed 150°C. Proper thermal management is crucial for reliable operation.
Reverse Voltage:
- Do not apply reverse voltages exceeding 45V to avoid damage to the device.
Forward Current:
- The maximum average forward rectified current is 12A at a case temperature of 75°C. Ensure that the current does not exceed this value to prevent overheating.
Storage:
- Store the device in a dry environment with temperatures between -65°C and 150°C to maintain its performance characteristics.
Testing:
- Before installation, perform a visual inspection to ensure there are no physical damages.
- Test the device using standard diode testing procedures to verify its functionality.
Handling:
- Handle the device with care to avoid mechanical stress or damage to the leads.
- Use anti-static precautions to prevent electrostatic discharge (ESD) damage.
Inquiry - 30J122A
