Share:
Specifications
SKU: 8853214
| Parameter | Symbol | Value | Unit |
|---|---|---|---|
| Maximum Forward Voltage | VF | 0.7 | V |
| Peak Reverse Voltage | VR(SM) | 360 | V |
| Average Rectified Current | IF(AV) | 60 | A |
| Surge Current (Non-Repetitive) | ISM | 480 | A |
| Junction Temperature | TJ | -55 to 175 | °C |
| Storage Temperature | TSTG | -55 to 150 | °C |
| Operating Temperature | TA | -55 to 125 | °C |
| Thermal Resistance, Junction to Case | RθJC | 0.4 | °C/W |
| Lead Soldering Temperature | - | 260 | °C (10s) |
Instructions:
Mounting:
- Ensure that the diode is mounted on a heat sink or PCB with adequate thermal management.
- Use appropriate mounting hardware to secure the diode and ensure good thermal contact.
Soldering:
- Preheat the PCB to reduce thermal shock.
- Apply solder within 10 seconds at a maximum temperature of 260°C.
- Avoid excessive heating to prevent damage to the diode.
Handling:
- Handle the diode with care to avoid mechanical stress.
- Use ESD (Electrostatic Discharge) protection to prevent damage from static electricity.
Storage:
- Store the diode in a dry, cool place away from direct sunlight.
- Keep the diode in its original packaging until ready for use.
Operation:
- Ensure that the operating conditions (voltage, current, temperature) do not exceed the specified maximum ratings.
- Regularly monitor the temperature of the diode during operation to prevent overheating.
Testing:
- Use a multimeter or diode tester to check the forward and reverse characteristics of the diode.
- Verify that the diode is functioning correctly before installing it in a circuit.
Inquiry - MMF60R360PTH
