Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 2.0 V to 5.5 V.
   • Do not exceed the maximum supply voltage to avoid damaging the device.

2. Input Levels:

   • For a logic low input (V_IL), the voltage should be less than or equal to 0.8 V.
   • For a logic high input (V_IH), the voltage should be greater than or equal to 2.0 V.

3. Output Levels:

   • The output low voltage (V_OL) should not exceed 0.4 V when sourcing 16 mA.
   • The output high voltage (V_OH) should be at least 2.4 V when sinking -4 mA.

4. Propagation Delay:

   • The propagation delay times (t_pdLH and t_pdHL) are specified at 3.5 ns under typical conditions (V_CC = 5.0 V, TA = 25°C).

5. Power Consumption:

   • The total power consumption (P_TOTAL) is typically 1.0 mW under no load conditions with V_CC = 5.0 V.

6. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering techniques to ensure reliable connections.

7. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.

8. Mounting:

   • Ensure proper alignment and orientation during mounting to avoid mechanical stress on the pins.

9. Testing:

   • Test the device under specified conditions to verify its performance before integrating it into your design.