Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free from contaminants.
   • Solder the resistor using a temperature-controlled soldering iron.
   • Do not exceed the maximum soldering temperature of 300°C for more than 10 seconds per joint.

3. Storage:

   • Store in a dry environment to prevent moisture absorption.
   • Avoid exposure to high temperatures and direct sunlight.

4. Testing:

   • Use a multimeter to verify the resistance value before and after installation.
   • Ensure the measured value falls within the specified tolerance range.

5. Operating Conditions:

   • Operate within the specified temperature range to ensure reliable performance.
   • Do not exceed the power rating to prevent damage or failure.

6. Disposal:

   • Dispose of the component according to local environmental regulations.
   • Do not incinerate the component.