Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V.
   • Connect the V_CC pin to the positive supply and GND to the ground.

2. Output Signal:

   • The output voltage (V_OUT) will be proportional to the current flowing through the sensor.
   • For zero current, the output voltage should be around 2.5V.
   • The sensitivity is typically 15 mV/A, meaning a 1A change in current will result in a 15mV change in output voltage.

3. Bandwidth:

   • The sensor has a typical bandwidth of 100 kHz, which means it can accurately measure current changes up to this frequency.

4. Isolation:

   • The sensor provides electrical isolation up to 2900 Vrms, ensuring safety in high-voltage applications.

5. Temperature Considerations:

   • Operate the sensor within the temperature range of -40°C to 150°C.
   • Store the sensor in an environment with temperatures between -55°C and 150°C.

6. Current Rating:

   • The maximum continuous current rating is 50A. Ensure that the current does not exceed this limit to avoid damage.

7. Thermal Management:

   • The thermal resistance (θ_JA) is 2.0°C/W. Proper heat dissipation is crucial to maintain the operating temperature within safe limits.

8. Mounting:

   • Mount the sensor on a suitable heatsink if high current or prolonged operation is expected.
   • Follow the mechanical specifications provided in the datasheet for correct mounting.

9. Handling:

   • Handle the sensor with care to avoid damage to the leads and the package.
   • Use appropriate ESD protection measures when handling the device.