Specifications
SKU: 8944487
Parameter | Symbol | Min | Typ | Max | Unit | Description |
---|---|---|---|---|---|---|
Reverse Voltage | VR | - | 6.8 | - | V | Maximum reverse voltage |
Forward Current | IF | - | 20 | - | mA | Maximum forward current (continuous) |
Peak Forward Current | IFSM | - | 100 | - | mA | Maximum peak forward current (10 ms pulse) |
Forward Voltage | VF | 1.8 | 2.2 | 2.6 | V @ IF=20mA | Forward voltage at 20 mA |
Reverse Current | IR | - | 100 | - | nA @ VR=6.8V | Reverse leakage current at maximum reverse voltage |
Operating Temperature | Toper | -40 | - | 85 | °C | Operating temperature range |
Storage Temperature | Tstg | -65 | - | 150 | °C | Storage temperature range |
Thermal Resistance | RθJA | - | 200 | - | K/W | Junction-to-ambient thermal resistance |
Instructions for ZMM6V8 ZMM6V8ST LL-34
Mounting and Handling:
- Use appropriate handling techniques to avoid damage from electrostatic discharge (ESD).
- Ensure that the component is mounted on a clean and flat surface.
- Follow the recommended soldering profile to prevent thermal stress.
Soldering:
- Preheat the PCB to 100-120°C.
- Soldering temperature should not exceed 260°C.
- Soldering time should not exceed 10 seconds per joint.
- Allow the component to cool naturally after soldering.
Electrical Connections:
- Connect the anode (A) and cathode (K) terminals correctly to avoid reverse polarity.
- Use a series resistor to limit the forward current to within the specified limits.
- Ensure that the reverse voltage does not exceed 6.8V to prevent breakdown.
Environmental Considerations:
- Store the component in a dry environment to prevent moisture absorption.
- Avoid exposing the component to corrosive gases or environments.
- Operate the component within the specified temperature range to ensure reliable performance.
Testing:
- Use a multimeter to verify the forward and reverse characteristics before installation.
- Test the component under normal operating conditions to ensure it meets the required specifications.
Packaging and Transportation:
- Handle the component with care during transportation to avoid mechanical damage.
- Store in the original packaging until ready for use to protect against static and physical damage.
Compliance:
- Ensure that the component complies with relevant safety and regulatory standards.
- Refer to the datasheet for specific compliance information and certifications.
Inquiry - ZMM6V8 ZMM6V8ST LL-34